Compliance with Good Manufacturing Practices (GMP) in Yellowtail Fusilier (Caesio cuning) Processing at PT. Arti Buana Lautan Indonesia

Authors

  • Sugianti Sumardi Institut Teknologi dan Bisnis Maritim Balik Diwa
  • Mutemainna Karim Institut Teknologi dan Bisnis Maritim Balik Diwa
  • Awaluddin Awaluddin Institut Teknologi dan Bisnis Maritim Balik Diwa
  • Muh. Ayusal Salam Institut Teknologi dan Bisnis Maritim Balik Diwa

DOI:

https://doi.org/10.63249/ijcms.v2i3.187

Keywords:

Manufacturing Practices, Caesio cuning, fish processing, food safety, frozen fillet, compliance audit

Abstract

Good Manufacturing Practices (GMP) form the foundation of food safety assurance in fish processing and are a prerequisite for the Processing Feasibility Certificate required of Indonesian fish processing units under the Regulation of the Minister of Marine Affairs and Fisheries No. 17/PERMEN-KP/2019. This study assessed the level of GMP compliance in the processing of frozen yellowtail fusilier (Caesio cuning) fillets at PT. Arti Buana Lautan Indonesia, Makassar, an export-oriented processing unit. A descriptive case study with a mixed-methods design was conducted from August to October 2025, combining direct observation of the 16-step production line, structured interviews with quality control staff, and an audit checklist covering the seven GMP aspects defined in the regulation. Each checklist item was scored on a four-point scale, and compliance was expressed as the percentage of the maximum attainable score. Compliance was high for packaging and labelling (100%), building (94.29%), handling and processing (94.70%), storage (94.40%), raw material selection (93.81%), and location and environment (89.23%). The lowest score was obtained for the use of food additives, processing aids and chemicals (75.00%), largely because the plant uses no additives and several checklist items were therefore not applicable. The overall mean compliance was 91.63%, which falls within the category of meeting GMP requirements. The main gaps were standing water in external drainage, the proximity of residential areas, floor wear in some processing areas, chlorine storage, and incomplete records of raw material origin and transport temperature. Addressing these gaps, together with excluding non-applicable items from future audits, would strengthen the plant's food safety system and its competitiveness in export markets.

Published

2026-11-21

How to Cite

Sumardi, S., Karim, M., Awaluddin, A., & Salam, M. A. (2026). Compliance with Good Manufacturing Practices (GMP) in Yellowtail Fusilier (Caesio cuning) Processing at PT. Arti Buana Lautan Indonesia. Indonesian Journal of Coastal and Marine Studies, 2(3), 129–139. https://doi.org/10.63249/ijcms.v2i3.187

Issue

Section

Articles